Labnet – Pipette Controller
Labnet‘s Pipette Controllers FastPette™ Pro and FastPette™ V2. The pipette controller is a device intended for general laboratory use only, for pipetting liquids with the use of measuring pipets. It can work with all types of glass or plastic pipets in the volume range from 0.5 mL to 100 mL.
FEATURED PRODUCTS
FastPette™ Pro The Labnet FastPette Pro is a lightweight and ergonomically shaped motorized pipet controller designed for work with glass or plastic serological pipe...
More About FastPette™ Pro 
FastPette™ Pro 
The Labnet FastPette Pro is a lightweight and ergonomically shaped motorized pipet controller designed for work with glass or plastic serological pipets from 0.5 to 100 mL range. Conveniently positioned switches allow choosing different operation modes and speed depending on the volume of the serological pipet and liquid viscosity. Additionally, aspirating and dispensing speed is controlled through two comfortable finger triggers.
- Conveniently placed triggers control speed and mose
- LCD display
- Easy access to battery compartment
- Autoclavable pipet holder
When fully charged, the NiMH batteries enable up to eight hours of continuous use. The Large LCD display indicates the battery status along with the pipetting mode and speed selected. In order to protect the device against overfilling, the FastPette Pro is equipped with a 0.2 µm PTFE filter. The filter, the pipet holder and the nosepiece are autoclavable. The FastPette™ Pro is also supplied with a universal power supply (US, EU, UK, and AU), an additional autoclavable 0.2 um filter, and a two-position charging stand.
Features of the FastPette Pro
- LCD display for convenient visualization of speed, modes, and battery status
- Triggers convenient for one or two finger control of speed and mode
- Easy access to the battery compartment. NiMH batteries allow cordless work for up to 8 hours
- Charging stand for bench or wall mounting
- Autoclavable pipet holder
- 1 year warranty
NEED EXPERT ADVICE? LEARN MORE
FastPette™ V2 This revolutionary battery powered pipet controller works with glass and plastic pipets in the 0.5 to 100 mL range. The Labnet FastPette V2 was design...
More About FastPette™ V2 
FastPette™ V2
This revolutionary battery powered pipet controller works with glass and plastic pipets in the 0.5 to 100 mL range. The Labnet FastPette V2 was designed with the user in mind. It has a lightweight handle with smooth push-buttons and ergonomically located switches.
- Works with pipets from 0.5 to 100 mL
- High aspiration speed – 25 mL in 4 seconds
- Cordless work for up to 8 continuous hours
- Ergonomically designed
The aspiration speed can be set to high or low to adjust for the volume of the pipet and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipet with a blowout step. The FastPette™ V2 is protected from the entrance of liquids by both a PTFE filter and a safety valve. To protect samples from cross-contamination, both the filter and pipet holder are easily exchanged and autoclaved. When fully charged, the FastPette™ V2 can be used continuously for eight hours. When the low battery light is lit, the unit should be recharged. Should the charge run out while working with the pipet controller, simply attach the power supply and continue to use. The battery is protected against overcharging by timing and thermal systems. The FastPette V2 is supplied with a universal power supply (US, EU, UK, and AU), wall hanger, bench stand, and 0.2 µm PFTE filter.
Features of the FastPette V2
- Works with pipets from 0.5 mL to 100 mL
- Cordless work for up to 8 continuous hours
- Ergonomically designed
- Autoclavable pipet holder
- 1 year warranty
NEED EXPERT ADVICE? LEARN MORE
