Nabertherm

Muffle Furnaces up to 1100 °C or 1200 °C

Mason Technology works in close partnership with Nabertherm to supply high quality laboratory muffle furnaces to customers across Ireland. This proven furnace range, rated up to 1100 °C or 1200 °C, is designed for reliable daily operation in research, industrial and quality control laboratories. These furnaces deliver precise temperature control, excellent uniformity and long service life. Therefore, they are well suited to heat treatment, sintering, ashing, material testing and ceramic applications where repeatable results matter. Mason Technology supports you throughout specification, installation and ongoing use, ensuring you select the right solution for your process without complexity.

Nabertherm Muffle Furnaces up to 1100 °C or 1200 °C Key Features

• Maximum operating temperatures up to 1100 °C or 1200 °C to support a wide range of thermal applications
• Ceramic heating elements mounted on two sides, or three sides on larger models, for excellent temperature uniformity
• Choice of flap door or lift up door design at no additional cost to suit laboratory workflows
• Robust double shell stainless steel housing with rear ventilation for low external surface temperatures
• Long lasting, non hazardous insulation materials that meet current safety and environmental standards
• Programmable digital controllers for accurate temperature profiles and repeatable processes
• Solid state relay technology for quiet operation and extended heater life
• Range of chamber volumes to suit both small sample work and higher throughput requirements
• Optional accessories including chimneys, gas inlet ports, over temperature protection and data interfaces

These muffle furnaces are designed to integrate easily into modern laboratory environments. In addition, their compact footprint and efficient insulation help reduce energy consumption while maintaining performance. Operation is intuitive, which reduces training time and improves day to day productivity. However, the construction remains robust enough for continuous professional use.

By choosing Mason Technology as your supplier, you gain access to trusted technical expertise, responsive service and long term support. We help Irish laboratories specify, commission and maintain Nabertherm muffle furnaces with confidence. Therefore, when precision, reliability and expert backup matter, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Ashing Furnaces up to 1100 °C

Mason Technology works in close partnership with Nabertherm to supply dedicated ashing furnaces designed for clean, controlled and repeatable combustion processes. The Ashing Furnaces up to 1100 °C are purpose built for laboratories carrying out loss on ignition, residue analysis and thermal decomposition of organic materials. This specialised furnace range supports accurate analytical results by ensuring effective air exchange and stable temperature control. Mason Technology supports Irish laboratories with expert specification advice and reliable local service, helping you achieve consistent outcomes with confidence.

Nabertherm Ashing Furnaces up to 1100 °C Key Features

• Maximum operating temperature up to 1100 °C for standard and advanced ashing applications
• Integrated fresh air supply and exhaust system to support clean and complete combustion
• Optimised airflow design to reduce contamination and improve reproducibility
• High quality insulation for efficient heat retention and stable temperature performance
• Heating elements arranged to ensure uniform temperature distribution within the chamber
• Durable double shell stainless steel housing with effective ventilation for operator safety
• Programmable digital controllers for precise temperature ramps and dwell times
• Solid state relay technology for quiet operation and long component life
• Range of chamber volumes available to suit different sample sizes and throughput needs

These ashing furnaces are designed for routine analytical work in environmental, food, pharmaceutical and materials laboratories. In addition, the controlled air exchange system helps prevent condensation and ensures reliable removal of combustion gases. Operation is straightforward, therefore reducing training time and minimising handling errors. However, the construction remains robust enough for frequent use in professional laboratory environments.

By choosing Mason Technology as your supplier, you gain access to trusted technical expertise, responsive support and long term partnership. We assist Irish laboratories with equipment selection, installation and ongoing service. Therefore, when precise ashing performance and dependable local support are essential, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Economy Muffle Furnaces up to 1100 °C

Mason Technology works in close partnership with Nabertherm to supply reliable economy muffle furnaces designed for routine laboratory heat treatment applications. The Economy Muffle Furnaces up to 1100 °C offer a cost effective solution for laboratories that require dependable performance without unnecessary complexity. These furnaces are ideal for educational laboratories, quality control, basic research and general thermal processing. They combine Nabertherm’s proven build quality with a simplified design, therefore delivering excellent value for Irish laboratories with budget conscious requirements.

Nabertherm Economy Muffle Furnaces up to 1100 °C Key Features

• Maximum operating temperature up to 1100 °C for standard laboratory heat treatment tasks
• Heating elements mounted on ceramic support tubes for reliable and consistent heat distribution
• Compact chamber design suitable for benchtop or space limited laboratory environments
• Durable, double shell housing with rear ventilation to maintain safe external surface temperatures
• Energy efficient insulation to reduce heat loss and operating costs
• Simple and intuitive controller for accurate temperature setting and stable operation
• Robust door construction with secure closing mechanism for safe daily use
• Designed for intermittent operation in teaching, research and industrial quality control labs

These economy muffle furnaces are built for straightforward operation and dependable results. In addition, their reduced complexity helps minimise maintenance requirements while maintaining Nabertherm’s high manufacturing standards. Temperature stability supports repeatable processing, which is essential for ashing, annealing, sintering and material testing tasks. However, the streamlined design keeps initial investment and running costs under control, making this range particularly attractive for laboratories managing multiple workstations.

Mason Technology is your trusted supplier of Nabertherm economy muffle furnaces in Ireland. We provide expert guidance during selection, installation support and reliable after sales service. Therefore, when you need a practical and proven furnace solution backed by local expertise, Mason Technology is the partner you can depend on.

By choosing Mason Technology as your supplier, you gain access to trusted technical expertise, responsive service and long term support. We help Irish laboratories specify, commission and maintain Nabertherm muffle furnaces with confidence. Therefore, when precision, reliability and expert backup matter, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Muffle Furnaces with Brick Insulation up to 1300 °C

Mason Technology works in close partnership with Nabertherm to supply advanced laboratory muffle furnaces engineered for higher temperature applications. The Muffle Furnaces with Brick Insulation up to 1300 °C are designed for laboratories that require robust construction, long service life and stable performance at elevated temperatures. This furnace range is well suited to materials research, ceramics, glass processing, heat treatment and advanced quality control. By combining durable brick insulation with proven heating technology, Nabertherm delivers consistent thermal results, while Mason Technology supports Irish customers with expert guidance and local service.

Nabertherm Muffle Furnaces with Brick Insulation up to 1300 °C Key Features

• Maximum operating temperature up to 1300 °C for demanding laboratory and industrial processes
• High quality brick insulation for excellent heat retention and long term thermal stability
• Heating elements protected within the brickwork to enhance durability and service life
• Robust double shell stainless steel housing with effective rear ventilation
• Stable temperature uniformity across the chamber for repeatable and reliable results
• Programmable digital controllers for precise temperature control and reproducible profiles
• Solid state relay technology for quiet operation and reduced wear on components
• Range of chamber volumes available to suit varied sample sizes and throughput needs
• Optional accessories including exhaust chimneys, gas inlet ports and safety temperature limiters

These brick insulated muffle furnaces are designed for continuous professional use where higher thermal mass is beneficial. In addition, the solid insulation design supports stable temperature control during long dwell times and repeated cycles. Operation remains straightforward, therefore reducing training requirements while maintaining precision. However, the construction is strong enough to withstand demanding laboratory environments over many years of use.

By choosing Mason Technology as your supplier, you benefit from trusted technical expertise, responsive support and long term partnership. We help Irish laboratories select, install and maintain Nabertherm muffle furnaces with confidence. Therefore, when your application demands higher temperatures and proven reliability, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Muffle Furnaces up to 1400 °C

Mason Technology works in close partnership with Nabertherm to supply high performance laboratory muffle furnaces designed for extreme temperature applications. The Muffle Furnaces up to 1400 °C are engineered for laboratories that require precise control, excellent temperature uniformity and long term reliability at very high operating temperatures. This range is ideally suited to advanced materials research, ceramics, glass processing, powder metallurgy and specialised heat treatment processes. By combining robust furnace construction with proven heating technology, Nabertherm delivers consistent results, while Mason Technology supports Irish laboratories with expert advice and dependable local service.

Nabertherm Muffle Furnaces up to 1400 °C Key Features

• Maximum operating temperature up to 1400 °C for demanding high temperature laboratory applications
• High quality insulation design to support efficient heat retention and stable thermal performance
• Heating elements optimised for high temperature operation and long service life
• Excellent temperature uniformity across the chamber for repeatable and accurate results
• Robust double shell stainless steel housing with effective ventilation for operator safety
• Advanced programmable controllers for precise temperature profiles and reproducible processes
• Solid state relay technology for quiet operation and reduced mechanical wear
• Range of chamber sizes available to accommodate different sample volumes and workflows
• Optional features including exhaust chimneys, gas connections and safety temperature limiters

These muffle furnaces are designed for professional laboratory environments where consistent high temperature performance is critical. In addition, the insulation and heating design support stable conditions during long soak times and repeated thermal cycles. Operation remains intuitive, therefore reducing training time and improving day to day efficiency. However, the overall construction is robust enough to withstand intensive use in research and industrial laboratories.

Mason Technology is your trusted supplier of Nabertherm muffle furnaces up to 1400 °C in Ireland. We provide expert support during specification, installation assistance and reliable after sales service. Therefore, when your laboratory requires high temperature capability backed by proven engineering and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Compact Tube Furnaces up to 1100 °C

Mason Technology works in close partnership with Nabertherm to supply compact tube furnaces designed for precise thermal processing in space conscious laboratory environments. The Compact Tube Furnaces up to 1100 °C provide reliable performance for controlled atmosphere and solid state reaction work, while maintaining a small footprint. These furnaces are well suited to research, development and educational laboratories that require accurate temperature control and flexible tube configurations. By combining proven heating technology with a compact design, Nabertherm delivers dependable results, while Mason Technology supports Irish customers with expert advice and local service.

Nabertherm Compact Tube Furnaces up to 1100 °C Key Features

• Maximum operating temperature up to 1100 °C for a wide range of laboratory tube furnace applications
• Compact horizontal design ideal for benchtop use and laboratories with limited space
• High quality heating elements arranged for uniform temperature distribution along the heated zone
• Compatible with a range of tube materials and diameters to support flexible applications
• Efficient insulation design to reduce heat loss and maintain stable operating conditions
• Robust double shell housing with ventilation to ensure safe external surface temperatures
• Precise digital temperature controllers for repeatable heating profiles and process stability
• Solid state relay technology for quiet operation and long component life
• Suitable for use with optional gas supply and exhaust accessories for controlled atmosphere work

These compact tube furnaces are designed to support consistent and reproducible thermal processes. In addition, their straightforward operation allows researchers to focus on experimental outcomes rather than equipment complexity. Temperature stability is maintained across extended heating cycles, which is essential for materials synthesis, annealing and diffusion studies. However, the compact form factor ensures the furnace integrates easily into existing laboratory setups without disruption.

Mason Technology is your trusted supplier of Nabertherm compact tube furnaces in Ireland. We provide guidance on configuration, accessories and installation, along with dependable after sales support. Therefore, when precision, flexibility and local expertise are required, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Compact Tube Furnaces up to 1300 °C

Mason Technology works in close partnership with Nabertherm to supply compact tube furnaces designed for high temperature laboratory processes where precision and space efficiency are essential. The Compact Tube Furnaces up to 1300 °C deliver reliable performance for advanced materials research, thermal treatment and controlled atmosphere applications. This range combines a compact footprint with robust construction, therefore making it suitable for research, development and academic laboratories across Ireland. With proven Nabertherm engineering and Mason Technology’s local expertise, laboratories can achieve accurate and repeatable results with confidence.

Nabertherm Compact Tube Furnaces up to 1300 °C Key Features

• Maximum operating temperature up to 1300 °C for demanding high temperature tube furnace applications
• Compact horizontal design suitable for benchtop use and space limited laboratory environments
• High quality insulation to ensure efficient heat retention and stable thermal conditions
• Optimised heating element arrangement for uniform temperature distribution along the heated zone
• Compatible with a wide range of ceramic and quartz tube materials and diameters
• Robust double shell housing with effective ventilation for safe external surface temperatures
• Programmable digital temperature controllers for precise ramps, dwell times and repeatable profiles
• Solid state relay technology for quiet operation and extended component life
• Suitable for optional gas supply and exhaust accessories for controlled or modified atmospheres

These compact tube furnaces are designed for laboratories that require high temperature capability without compromising on workspace. In addition, their efficient insulation and stable temperature control support long soak times and repeatable experimental conditions. Operation remains straightforward, therefore reducing training requirements and improving daily productivity. However, the construction is robust enough to withstand frequent use in professional research environments.

Mason Technology is your trusted supplier of Nabertherm compact tube furnaces up to 1300 °C in Ireland. We provide expert guidance on furnace selection, tube configurations and optional accessories, alongside dependable installation and after sales support. Therefore, when your laboratory demands precise high temperature tube furnace performance backed by local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Split-Type Tube Furnaces for Horizontal and Vertical Operation up to 1300 °C

Mason Technology works in close partnership with Nabertherm to supply versatile split type tube furnaces designed for flexible laboratory operation. The Split Type Tube Furnaces for Horizontal and Vertical Operation up to 1300 °C are engineered to support a wide range of thermal processes while allowing easy access to the tube and sample. This design is particularly valuable for laboratories that require frequent sample changes, controlled atmosphere work or vertical processing configurations. By combining adaptable operation with proven high temperature performance, Nabertherm delivers reliable results, while Mason Technology supports Irish laboratories with expert guidance and dependable local service.

Nabertherm Split Type Tube Furnaces for Horizontal and Vertical Operation up to 1300 °C Key Features

• Maximum operating temperature up to 1300 °C for demanding laboratory tube furnace applications

• Split furnace design that opens easily, allowing fast tube changes and simplified sample handling

• Suitable for both horizontal and vertical operation to support flexible experimental setups

• Optimised heating element layout for uniform temperature distribution along the heated zone

• High quality insulation to ensure efficient heat retention and stable thermal performance

• Compatible with a wide range of tube materials and diameters for diverse applications

• Robust double shell housing with effective ventilation for safe external surface temperatures

• Programmable digital controllers for precise temperature ramps, dwell times and repeatable profiles

• Solid state relay technology for quiet operation and long component life

• Designed for use with optional gas supply and exhaust accessories for controlled atmosphere processes

These split type tube furnaces are ideal for materials research, chemical processing and thermal analysis tasks where accessibility and flexibility are essential. In addition, the ability to operate in both horizontal and vertical orientations allows laboratories to adapt the furnace to specific workflows and sample requirements. Operation remains intuitive, therefore reducing setup time and improving productivity. However, the construction is robust enough to support frequent use in demanding research environments.

Mason Technology is your trusted supplier of Nabertherm split type tube furnaces in Ireland. We provide expert advice on configuration, accessories and installation, along with reliable after sales support. Therefore, when your laboratory requires adaptable high temperature tube furnace solutions backed by local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Rotary Tube Furnaces for Batch Operation up to 1100 °C

Mason Technology works in close partnership with Nabertherm to supply specialised rotary tube furnaces designed for uniform batch processing of powders and granular materials. The Rotary Tube Furnaces for Batch Operation up to 1100 °C are engineered to deliver consistent thermal treatment through continuous rotation of the tube during heating. This controlled movement improves heat transfer and material homogeneity, therefore supporting reliable and repeatable results. These furnaces are well suited to research, development and pilot scale processing in Irish laboratories working with powders, catalysts and advanced materials. Mason Technology provides expert support to ensure correct configuration and long term performance.

Nabertherm Rotary Tube Furnaces for Batch Operation up to 1100 °C Key Features

• Maximum operating temperature up to 1100 °C for a wide range of batch thermal processing applications
• Rotary tube design to ensure uniform heating and consistent treatment of powders and granulates
• Controlled rotation speed to support process optimisation and repeatability
• High quality heating system for stable temperature distribution along the heated zone
• Efficient insulation design to minimise heat loss and improve energy efficiency
• Robust mechanical construction designed for reliable operation during repeated batch cycles
• Compatible with various tube materials and diameters to suit different process requirements
• Programmable digital controllers for precise temperature ramps, dwell times and reproducible results
• Solid state relay technology for quiet operation and extended component life
• Suitable for optional gas supply and exhaust connections for controlled or modified atmospheres

These rotary tube furnaces are designed to support consistent processing where material movement is essential to achieve uniform results. In addition, the batch operation format allows laboratories to maintain full control over processing parameters and material handling. Operation is straightforward, therefore reducing setup time and improving workflow efficiency. However, the design remains robust enough to support frequent use in demanding laboratory and development environments.

Mason Technology is your trusted supplier of Nabertherm rotary tube furnaces in Ireland. We offer expert advice on furnace configuration, tube selection and optional accessories, alongside dependable installation and after sales support. Therefore, when your application requires uniform batch processing backed by proven engineering and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Tube Furnaces with Stand for Horizontal and Vertical Operation up to 1500 °C

Mason Technology works in close partnership with Nabertherm to supply advanced tube furnace solutions for laboratories working at very high temperatures. The Tube Furnaces with Stand for Horizontal and Vertical Operation up to 1500 °C are designed for demanding applications that require flexibility, precision and long term thermal stability. This furnace range supports both horizontal and vertical configurations, therefore allowing laboratories to adapt the system to different processes and sample types. With proven Nabertherm engineering and Mason Technology’s local expertise, Irish research and industrial laboratories can achieve accurate and repeatable high temperature results.

Nabertherm Tube Furnaces with Stand for Horizontal and Vertical Operation up to 1500 °C Key Features

• Maximum operating temperature up to 1500 °C for advanced high temperature laboratory applications
• Floor mounted stand design providing stability and safe operation at elevated temperatures
• Suitable for both horizontal and vertical operation to support flexible experimental setups
• High performance insulation designed for efficient heat retention and thermal stability
• Optimised heating element configuration for excellent temperature uniformity along the heated zone
• Compatible with a wide range of high temperature tube materials and diameters
• Robust double shell housing with effective ventilation for reduced external surface temperatures
• Programmable digital controllers for precise temperature ramps, soak times and reproducible profiles
• Solid state relay technology for quiet operation and long component life
• Suitable for optional gas supply, exhaust systems and safety temperature limiters

These tube furnaces are ideal for materials science, ceramics, crystal growth and advanced thermal processing where extreme temperatures and stable conditions are essential. In addition, the rigid stand construction supports safe handling and reliable alignment during operation. Temperature control remains precise even during long dwell times, therefore supporting consistent experimental outcomes. However, the system remains intuitive to operate, reducing training requirements and improving daily efficiency.

Mason Technology is your trusted supplier of Nabertherm tube furnaces up to 1500 °C in Ireland. We provide expert advice on configuration, installation and accessories, alongside dependable after sales support. Therefore, when your laboratory requires high temperature capability combined with operational flexibility and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

High-Temperature Tube Furnaces for Horizontal or Vertical Operation up to 1800 °C

Mason Technology works in close partnership with Nabertherm to supply ultra high temperature tube furnaces for laboratories operating at the limits of thermal processing. The High Temperature Tube Furnaces for Horizontal or Vertical Operation up to 1800 °C are engineered for the most demanding research and development applications. This furnace range is designed for extreme materials science, advanced ceramics, refractory testing and specialised thermal processes that require precise control at exceptionally high temperatures. By combining advanced heating technology with robust mechanical design, Nabertherm delivers reliable performance, while Mason Technology supports Irish laboratories with expert advice and dependable local service.

Nabertherm High Temperature Tube Furnaces for Horizontal or Vertical Operation up to 1800 °C Key Features

• Maximum operating temperature up to 1800 °C for ultra high temperature laboratory applications
• Advanced high temperature heating system designed for stable performance at extreme conditions
• Suitable for both horizontal and vertical operation to support flexible experimental configurations
• High performance insulation system to ensure excellent heat retention and thermal stability
• Optimised furnace design for uniform temperature distribution along the heated zone
• Floor mounted construction with rigid frame for safe and stable operation
• Compatible with specialised high temperature ceramic tube materials
• Advanced programmable controllers for precise temperature ramps, soak times and repeatable profiles
• Solid state relay technology for quiet operation and long component life
• Designed for use with optional gas supply, exhaust systems and safety temperature limiters

These high temperature tube furnaces are intended for laboratories that require absolute reliability during long dwell times and repeated thermal cycles at extreme temperatures. In addition, the flexible horizontal or vertical configuration allows adaptation to specific process requirements and sample geometries. Operation remains intuitive despite the advanced capability, therefore supporting efficient daily use. However, the construction is robust enough to withstand intensive operation in demanding research and industrial environments.

Mason Technology is your trusted supplier of Nabertherm high temperature tube furnaces up to 1800 °C in Ireland. We provide expert guidance on furnace selection, configuration and accessories, alongside installation support and long term after sales service. Therefore, when your application demands ultra high temperature performance backed by proven engineering and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Electrically Heated Ovens

Mason Technology partners with Nabertherm to supply high quality electrically heated ovens designed for precise and reliable thermal processing in laboratory environments. The Electrically Heated Ovens range is engineered for drying, heating, curing and ageing applications where uniform temperature distribution and dependable operation are essential. These ovens are widely used in research, quality control, industrial laboratories and educational settings across Ireland. By combining efficient heating technology with robust construction, Nabertherm delivers consistent performance, while Mason Technology supports customers with expert guidance and trusted local service.

Nabertherm Electrically Heated Ovens Key Features

• Electrically heated design for clean, precise and controllable temperature operation
• Uniform temperature distribution to support repeatable drying and heating processes
• High quality insulation to minimise heat loss and improve energy efficiency
• Robust double shell housing with effective ventilation for safe external surface temperatures
• Reliable heating elements designed for long service life in daily laboratory use
• Precise digital temperature controllers for stable setpoints and reproducible results
• User friendly operation to reduce training time and improve workflow efficiency
• Range of chamber sizes available to suit different sample volumes and laboratory needs
• Suitable for a wide variety of applications including drying, warming, curing and material conditioning

These electrically heated ovens are designed to integrate easily into modern laboratory workflows. In addition, their stable temperature control supports consistent processing of sensitive samples and components. The construction balances durability with ease of use, therefore making these ovens suitable for both routine and more demanding laboratory tasks. However, the straightforward design keeps maintenance requirements low while ensuring long term reliability.

Mason Technology is your trusted supplier of Nabertherm electrically heated ovens in Ireland. We provide expert advice during equipment selection, along with installation support and reliable after sales service. Therefore, when your laboratory requires dependable oven performance backed by proven engineering and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Chamber Ovens up to 260 °C

Mason Technology partners with Nabertherm to supply reliable chamber ovens designed for precise thermal processing at moderate temperatures. The Chamber Ovens up to 260 °C are engineered for drying, heating, curing and ageing applications where uniform temperature distribution and stable operation are essential. This oven range is well suited to research laboratories, quality control environments and industrial testing facilities across Ireland. By combining robust construction with efficient forced convection technology, Nabertherm delivers consistent results, while Mason Technology provides expert local support and guidance throughout the equipment lifecycle.

Nabertherm Chamber Ovens up to 260 °C Key Features

• Maximum operating temperature up to 260 °C for a wide range of laboratory and industrial applications
• Forced air circulation system to ensure excellent temperature uniformity throughout the chamber
• Fast heat up times and stable temperature control for efficient daily operation
• High quality insulation to reduce heat loss and improve energy efficiency
• Robust double shell stainless steel housing with effective ventilation for operator safety
• Reliable electric heating elements designed for long service life
• Precise digital temperature controllers for accurate setpoints and repeatable processes
• User friendly operation suitable for routine laboratory workflows
• Wide range of chamber volumes available to suit different sample sizes and throughput requirements
• Suitable for applications including drying, warming, curing, ageing and material conditioning

These chamber ovens are designed to deliver dependable performance in demanding laboratory environments. In addition, the forced convection design ensures consistent conditions, which is critical when processing temperature sensitive samples or multiple loads. Operation is intuitive, therefore reducing training time and improving productivity. However, the ovens remain robust enough to support frequent use in professional research and industrial settings.

By choosing Mason Technology as your supplier, you benefit from trusted technical expertise, responsive support and long term partnership. We help Irish laboratories specify, install and maintain Nabertherm chamber ovens with confidence. Therefore, when reliable temperature performance and dependable local service are essential, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Forced Convection Chamber Furnaces up to 675 L

Mason Technology partners with Nabertherm to supply high capacity forced convection chamber furnaces designed for uniform heat treatment of large or densely loaded batches. The Forced Convection Chamber Furnaces up to 675 litres are engineered for applications where excellent temperature uniformity, controlled airflow and reliable performance are essential. This furnace range is ideally suited to industrial laboratories, research facilities and pilot scale environments across Ireland that process larger components or higher volumes. By combining forced air circulation with robust furnace construction, Nabertherm delivers consistent and repeatable results, while Mason Technology provides trusted local expertise and support.

Nabertherm Forced Convection Chamber Furnaces up to 675 Litres Key Features

• Large chamber volumes up to 675 litres to accommodate bulky parts or high throughput loads
• Forced convection airflow system for excellent temperature uniformity throughout the chamber
• Even heat distribution across multiple shelf levels and densely packed loads
• Efficient insulation design to minimise heat loss and improve energy efficiency
• Robust double shell housing with effective ventilation for safe external surface temperatures
• Reliable electric heating elements designed for continuous professional use
• Precise programmable temperature controllers for accurate ramps, dwell times and repeatable cycles
• User friendly operation to support efficient daily workflows
• Stable construction suitable for integration into industrial and laboratory environments
• Designed for applications including preheating, drying, ageing and controlled heat treatment

These forced convection chamber furnaces are designed to deliver consistent thermal conditions even with challenging load configurations. In addition, the active airflow system reduces temperature gradients, therefore improving process quality and repeatability. Operation remains intuitive, which helps reduce setup time and operator training. However, the construction is robust enough to support frequent use in demanding laboratory and pilot scale applications.

Mason Technology is your trusted supplier of Nabertherm forced convection chamber furnaces in Ireland. We provide expert guidance on specification, installation and long term support to ensure reliable operation. Therefore, when your application requires uniform heat treatment in a large chamber backed by proven engineering and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Ovens with Safety Technology

Mason Technology partners with Nabertherm to supply electrically heated ovens with integrated safety technology for laboratories that handle sensitive, volatile or safety critical processes. The Ovens with Safety Technology range is designed to protect personnel, samples and facilities while delivering reliable thermal performance. These ovens are suitable for drying, heating and conditioning tasks where controlled temperature operation must be combined with enhanced safety features. By integrating proven safety concepts into robust oven designs, Nabertherm supports compliant laboratory operation, while Mason Technology provides Irish customers with expert guidance and dependable local support.

Nabertherm Ovens with Safety Technology Key Features

• Integrated safety technology designed to protect users, samples and laboratory environments
• Reliable electrically heated operation for precise and controllable temperature performance
• Advanced monitoring systems to support safe operation during critical heating processes
• High quality insulation to reduce heat loss and maintain stable internal temperatures
• Robust double shell housing with effective ventilation for safe external surface temperatures
• Designed to meet laboratory safety requirements for demanding applications
• Precise digital temperature controllers for accurate setpoints and repeatable results
• User friendly operation to reduce handling errors and improve workflow safety
• Range of chamber sizes available to suit different laboratory processes and sample volumes
• Suitable for applications involving sensitive materials or enhanced operational risk

These ovens are designed for laboratories where safety is as important as thermal accuracy. In addition, the integrated protection systems help minimise operational risks during routine and specialised heating tasks. Temperature stability supports consistent processing, therefore improving repeatability and confidence in results. However, the design remains straightforward to operate, allowing laboratories to maintain productivity without added complexity.

Mason Technology is your trusted supplier of Nabertherm ovens with safety technology in Ireland. We assist laboratories with correct product selection, installation and ongoing service to ensure safe and compliant operation. Therefore, when your application requires dependable oven performance combined with enhanced safety and local technical expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Forced Convection Chamber Furnaces up to 500 L with Safety Technology

Mason Technology partners with Nabertherm to supply forced convection chamber furnaces designed for safe and uniform heat treatment in demanding laboratory and industrial environments. The Forced Convection Chamber Furnaces up to 500 L with Safety Technology are engineered for applications that require excellent temperature uniformity, controlled airflow and enhanced operational safety. This furnace range is ideal for processing larger loads or sensitive materials where consistent conditions and risk mitigation are essential. By combining forced convection performance with integrated safety features, Nabertherm delivers dependable results, while Mason Technology supports Irish customers with expert guidance and trusted local service.

Nabertherm Forced Convection Chamber Furnaces up to 500 L with Safety Technology Key Features

• Chamber volumes up to 500 L to support larger components or higher throughput processing
• Forced convection airflow system for excellent temperature uniformity throughout the chamber
• Integrated safety technology to protect personnel, samples and laboratory infrastructure
• Stable and even heat distribution across densely loaded or multi level configurations
• High quality insulation to minimise heat loss and improve energy efficiency
• Robust double shell housing with effective ventilation for safe external surface temperatures
• Reliable electric heating elements designed for continuous professional use
• Programmable digital temperature controllers for precise ramps, dwell times and repeatable cycles
• User friendly operation to support safe and efficient daily workflows
• Suitable for applications including drying, preheating, ageing and controlled heat treatment

These forced convection chamber furnaces are designed for laboratories where both process quality and safety are critical. In addition, the active airflow system reduces temperature gradients, therefore improving repeatability and product consistency. The integrated safety features support compliant operation when working with challenging materials or processes. However, the system remains intuitive to operate, helping reduce training time and improve overall productivity.

Mason Technology is your trusted supplier of Nabertherm forced convection chamber furnaces with safety technology in Ireland. We provide expert advice on specification, installation and long term support to ensure safe and reliable operation. Therefore, when your application demands uniform heat treatment combined with enhanced safety and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Chamber Furnaces with Brick or Fibre Insulation up to 1400 °C

Mason Technology partners with Nabertherm to supply high temperature chamber furnaces designed for demanding laboratory and pilot scale heat treatment applications. The Chamber Furnaces with Brick Insulation or Fibre Insulation up to 1400 °C offer flexibility, durability and precise thermal control for processes that require stable and repeatable conditions. These furnaces are widely used in materials research, ceramics, metallurgy and advanced industrial development across Ireland. By offering a choice of insulation type, Nabertherm allows laboratories to optimise performance for their specific process needs, while Mason Technology provides trusted local expertise and long term support.

Nabertherm Chamber Furnaces with Brick Insulation or Fibre Insulation up to 1400 °C Key Features

• Maximum operating temperature up to 1400 °C for high temperature laboratory and pilot scale applications
• Choice of brick insulation for high thermal mass and long dwell processes
• Fibre insulation option for faster heat up and cooling cycles with improved energy efficiency
• Excellent temperature uniformity to support controlled and repeatable heat treatment results
• High quality heating element design for reliable performance and long service life
• Robust double shell housing with effective ventilation for safe external surface temperatures
• Programmable digital temperature controllers for precise ramps, soak times and reproducible profiles
• Stable construction suitable for continuous professional laboratory use
• Range of chamber sizes available to accommodate different component dimensions and batch volumes

These chamber furnaces are designed to support consistent thermal processing under demanding conditions. In addition, the ability to select brick or fibre insulation allows laboratories to tailor furnace performance to their workflow, whether prioritising stability or cycle speed. Operation remains intuitive, therefore reducing training time and improving daily efficiency. However, the construction is robust enough to withstand frequent use in research and industrial environments.

Mason Technology is your trusted supplier of Nabertherm chamber furnaces up to 1400 °C in Ireland. We provide expert advice on configuration, installation and ongoing service to ensure reliable long term operation. Therefore, when your laboratory requires high temperature performance combined with proven engineering and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?

Chamber Furnaces for Annealing, Hardening and Brazing up to 1280 °C

Mason Technology partners with Nabertherm to supply chamber furnaces designed specifically for controlled heat treatment processes. The Chamber Furnaces for Annealing, Hardening and Brazing up to 1280 °C are engineered for laboratories and pilot scale environments that require precise temperature control, excellent uniformity and reliable long term operation. These furnaces are widely used for metallurgical research, materials development and industrial testing across Ireland. By combining robust construction with proven heating technology, Nabertherm supports demanding thermal processes, while Mason Technology provides trusted local expertise and support.

Nabertherm Chamber Furnaces for Annealing, Hardening and Brazing up to 1280 °C Key Features

• Maximum operating temperature up to 1280 °C for advanced heat treatment applications
• Designed specifically for annealing, hardening and brazing processes
• Excellent temperature uniformity to ensure consistent and repeatable treatment results
• High quality insulation for stable thermal conditions during long soak times
• Reliable heating element design for continuous professional use
• Robust double shell housing with effective ventilation for safe external surface temperatures
• Programmable digital controllers for precise temperature ramps, dwell times and reproducible cycles
• Stable chamber construction suitable for laboratory and pilot scale operation
• Range of chamber sizes available to accommodate different component dimensions and batch volumes

These chamber furnaces are designed to deliver controlled thermal environments where process accuracy is critical. In addition, stable temperature control supports metallurgical consistency and repeatable material properties. Operation remains straightforward, therefore reducing setup time and operator training. However, the construction is robust enough to support frequent use in demanding research and industrial laboratory settings.

Mason Technology is your trusted supplier of Nabertherm chamber furnaces for annealing, hardening and brazing in Ireland. We provide expert advice on furnace selection, configuration and installation, alongside dependable after sales support. Therefore, when your application requires reliable heat treatment performance backed by proven engineering and local expertise, Mason Technology is the partner you can rely on.

NEED EXPERT ADVICE?