NuWave Sensors
Mason Technology is a distributor for NuWave Sensors in the Irish marketplace and the exclusive distributor for their LumAir and GlanAir product ranges.
NuWave Sensors, with a manufacturing base in Mayo and a R&D facility in Dublin, develop smart air quality monitors that are designed to continuously monitor airborne contaminants. Their range of products, including LumAir, GlanAir, and AirSentric, are for facilities in the pharmaceutical, healthcare, medical device, food, packaging, and research sectors where continuous monitoring with rapid detection of contamination events is crucial.
NuWave Sensor products from Mason Technology
Our sales specialists can advise you on the product or solution that is best suited to your individual needs.
- LumAir: The LumAir™️ Airborne Pathogen Monitoring System (APMS) provides 24-7 monitoring, detection, and analysis of pathogenic threats, transforming traditional spot-checking and costly off-site analysis.
- GlanAir: The GlanAir CEMS provides automated 24-7 monitoring to verify acceptable particle ranges in controlled environments and cleanrooms. The system provides a real-time alarm in the event of a particle spike or contamination threat.
- AirSentric: A complete Indoor Air Quality monitoring solution for commercial buildings with a range of sensing options so that you can monitor what matters in the building.
Mason Technology and our Quality Assurance
With science impacting all levels of society, regulatory bodies strive for adequate standards, giving rise to a growing number of regulations in the pharmaceutical, biopharma, nutrition and beverage, and research and academia sectors.
At Mason Technology we have long since recognised the importance of Quality Assurance to our customers and we have held continuous certification to ISO standards since 1994. We are committed to continuous improvement, and this is backed up by our investment in an Integrated Management System (IMS). This meets, at a minimum, the requirements of the International Standards ISO 9001, ISO 14001, ISO 45001, and ISO 17025 (INAB). View our certifications here.
FEATURED PRODUCTS
LumAir - Airborne Pathogen Monitoring System
The LumAir™️ Airborne Pathogen Monitoring System (APMS), developed by NuWave Sensors, provides 24-7 monitoring, detection and analysis o...
More About LumAir - Airborne Pathogen Monitoring System
LumAir - Airborne Pathogen Monitoring System
The LumAir™️ Airborne Pathogen Monitoring System (APMS), developed by NuWave Sensors, provides 24-7 monitoring, detection and analysis of pathogenic threats, transforming traditional spot-checking and costly off-site analysis. it comprises the LA200 pathogen detection monitor supported by the HEX software platform. The user interface can be displayed on a desktop, tablet or on a mobile phone. HEX is easily integrated with host applications.
NuWave Sensors LumAir LA200 Pathogen Detection Monitor
The LumAir LA200 is a patented microbial detection monitor. The cartridges system contains cartridges that can be used for 2-week monitoring cycles. The cartridges prevent cross contamination between monitoring cycles. The LumAir LA200 has intelligent temperature and humidity control for optimum target pathogen growth conditions.
The LumAir LA200 significantly shortens contamination detection times enabling early intervention
- Full process is typically 8-12 hours
- Save days/weeks against traditional testing using laboratory sample processing
- No separate incubation or analysis period
- No preparation time for samples
- Immediate alert via remote management system
NuWave Sensors LumAir monitor is easy to set up and operate
- Once a cartridge is loaded monitoring is automatic meaning the LA200 can be operated by a non-technical person. Live status can be viewed for multiple devices on the user interface.
Continuous monitoring in the LA200 represents a paradigm shift away from one-off testing
- Continuous air sampling
Isolation of contamination sources with multiple monitored points
Cloud based software to present live status
Established Agar Methodology
The LA200 uses a culture-based agar methodology with a simple cartridge system. A sample of ambient air is drawn into the cartridge where pathogens have time to settle on the nutrient-rich and environmentally controlled detection site. Advanced image based processing of growth determines if microbial contamination is present.
Cartridges are designed to enable operatives to quickly and easily change without risk of cross contamination. The LA200 incorporates advanced control systems to maintain optimum conditions for pathogens to develop for detection.
NEED EXPERT ADVICE?
AirSentric Air Monitoring
NuWave Sensors AirSentric is a complete real-time monitoring solution for commercial buildings with a range of sensing options so that you ca...
More About AirSentric Air Monitoring
AirSentric Air Monitoring
NuWave Sensors AirSentric is a complete real-time monitoring solution for commercial buildings with a range of sensing options so that you can monitor what matters in your building.
Applications for NuWave Sensors AirSentric Air Monitoring Solutions include:
- Workplace – optimise the environmental conditions for a healthy workplace
- Compliance and Building Certification – whichever standard you require for your building (RESET®, WELL v2.0, fitwel, LEED 4.1 O+M, RESET® Air) the AirSentric sensor system is designed to simplify and automate the process.
- Education – manage CO₂ and environmental conditions in schools and universities to create safe and productive learning environments
- Smart Buildings – the AirSentric IoT system is designed to simplify the process of supplying reliable, robust and timely data to support smart building technologies.
Air Quality Monitor
AirSentric™️ WB55 – SKU: 118
- PM 1.0, 2.5, 4.0; 10.0; TVOC; Carbon Dioxide; Temperature and Relative Humidity
- RESET® Air tested & accredited
- Compliant with building certifications including WELL v2.0, RESET® Air, LEED, fitwel
- Modular design enables bespoke configuration and additional parameters
- Easy to install and connect via network or 4G
- Mains power or PoE
- HEX performance management software included for desktop, mobile or tablet display, with no recurring fees
CO₂ Monitor
AirSentric™️ WB55 – SKU: 102
- Carbon Dioxide, Temperature and Relative Humidity
- Used to manage ventilation levels, CO₂ and thermal comfort across occupied spaces, particularly smaller spaces such as meeting rooms
- Easy to install and connect via network or 4G
- Mains power or PoE
- HEX performance management software included for desktop, mobile or tablet display, with no recurring fees
Presence Detection Monitor
AirSentric™️ PD29 – SKU: 119
- Dedicated presence detection and occupancy monitor
- Motion Levels using PIR sensor
- Sound Levels in dBA
- Light Levels in lux
- Modular design enables bespoke configuration and additional parameters include thermal comfort, Indoor Air Quality and CO₂
- HEX performance management software included for desktop, mobile or tablet display, with no recurring fees
NEED EXPERT ADVICE?
GlanAir Particle Monitoring
The NuWave Sensors GlanAir Controlled Environment Monitoring System (CEMS) provides automated 24-7 monitoring to verify acceptable particle r...
More About GlanAir Particle Monitoring
GlanAir Particle Monitoring
The NuWave Sensors GlanAir Controlled Environment Monitoring System (CEMS) provides automated 24-7 monitoring to verify acceptable particle ranges in controlled environments and cleanrooms. The system provides a real-time alarm in the event of a particle spike or contamination threat.
The GlanAir CEMS is a plug and play continuous monitoring system designed for ease of set-up and no-touch operation. The system comprises 4 core elements:
Monitoring devices
- TD40 – particle counter + temperature/humidity
- DP100 – differential pressure monitor
- Range of additional sensor options
Plug & Play Connectivity
- Zigbee protocol for superior coverage & reliability
- Plug and play connection with wireless gateway
- Up to 50 devices
HEX Software
- View multiple buildings remotely
- Monitor live particle status + real-time alerts
- Particulate analysis tools
Ease of Integration
- Secure presentation of live data
- Integrates with SCADA, BMS or other host applications
- Easy to use cloud API
NuWave Sensors GlanAir CEMS Monitoring Devices
TD40 – Particle Counter + Temperature/Humidity
The TD40 is a high-precision particle monitor for detecting and characterising non-viable contaminants such as dust, mould, debris, and volatile organic compounds (VOCs). Particles from 0.35 to 40 μm in diameter are measured using a laser-based particle sensor and pump-less air flow system.
GlanAir HEX Platform
HEX cloud software is used for monitoring live status for multiple devices at a glance. The software is subscription-free. With the software you can remotely view multiple buildings, check on the live status, access particulate analysis tools, and set real-time alerts
Ease of Integration of GlanAir CEMS
The system is designed for ease of integration. All data is available through the HEX OpenAPI 2.0 documented RESTful API.
NEED EXPERT ADVICE?
