Magnetic Particle Inspection Consumables

Aerosol MPI Products

Aerosol MPI products provide a practical and efficient solution for portable magnetic particle inspection applications across industrial, manufacturing, and maintenance environments. Mason Technology supplies aerosol magnetic particle inspection consumables from trusted manufacturers including SREM, helping inspection teams achieve reliable non destructive testing results throughout Ireland.

Aerosol magnetic particle inspection systems are widely used for detecting surface and near surface discontinuities in ferromagnetic materials. These ready to use products are particularly suitable for localised inspections, field testing, weld evaluation, and maintenance applications where fast deployment and ease of use are important.

The aerosol format allows inspectors to quickly apply cleaners, contrast paints, and magnetic particle suspensions without requiring larger bench systems or immersion equipment. This makes aerosol MPI products especially useful for portable inspections and on site maintenance operations.

The inspection process typically begins with surface preparation using a dedicated cleaner or remover spray. A contrast paint may then be applied to improve indication visibility during visible inspection processes. Magnetic particle aerosols are subsequently applied to the test surface while the component is magnetised, allowing discontinuities to become visible through particle accumulation.

Mason Technology supplies a broad range of aerosol MPI consumables designed to support complete inspection workflows across industrial non destructive testing environments.

Aerosol MPI Products Key Features

• Ready to use aerosol products for portable magnetic particle inspection
• Suitable for visible and fluorescent MPI inspection methods
• Cleaner and remover sprays for effective surface preparation
• White contrast paints designed to improve defect visibility
• Black magnetic inks for visible inspection applications
• Fluorescent magnetic particle aerosols for ultraviolet inspection processes
• Fast and efficient application for workshop and field inspections
• Suitable for weld inspection, fabrication, and maintenance testing
• Portable solution for on site non destructive testing operations
• Supports reliable defect detection across industrial applications

Aerosol magnetic particle inspection products are commonly used throughout:

• Weld inspection and fabrication
• Industrial maintenance
• Manufacturing quality control
• Energy and power generation industries
• Automotive engineering
• Aerospace maintenance and repair operations

Visible aerosol MPI systems provide efficient inspection under standard lighting conditions, while fluorescent products support higher sensitivity inspections using ultraviolet light. This flexibility allows inspection teams to select the most suitable method for their operational requirements and inspection sensitivity needs.

SREM aerosol MPI products are designed to deliver dependable inspection performance and consistent application quality across demanding industrial environments. The range includes magnetic particle aerosols, cleaners, removers, and contrast paints suitable for a broad range of non destructive testing procedures.

Mason Technology works closely with trusted international suppliers including SREM to provide reliable aerosol MPI products throughout Ireland. Our team can assist with selecting the most suitable magnetic particle inspection consumables based on your inspection process, testing environment, and operational requirements.

NEED EXPERT ADVICE?

Water Based MPI Products

Water based MPI products provide an efficient and reliable solution for magnetic particle inspection processes across industrial manufacturing and non destructive testing environments. Mason Technology supplies water based magnetic particle inspection consumables from trusted manufacturers including SREM, supporting accurate defect detection throughout Ireland.

Water based magnetic particle inspection systems are commonly used for wet method MPI applications where effective particle mobility and broad surface coverage are required. These systems are designed to help inspectors identify surface and near surface discontinuities in ferromagnetic materials during industrial inspection processes.

In wet magnetic particle inspection, finely suspended magnetic particles are carried in a water based solution and applied to the test component while the material is magnetised. Particle accumulation around discontinuities helps reveal cracks, laps, seams, and other defects that may affect component integrity.

Water based MPI systems are widely used within:

• Manufacturing and production facilities
• Automated inspection lines
• Industrial fabrication environments
• Aerospace component inspection
• Automotive engineering
• Energy and heavy industry applications

Compared with oil based carrier systems, water based MPI products can provide easier cleaning and efficient application across larger inspection areas. These products are commonly selected for high volume industrial inspection workflows where consistency and operational efficiency are important.

Mason Technology supplies a range of water based magnetic particle inspection consumables suitable for visible and fluorescent inspection methods.

Water Based MPI Products Key Features

• Water based magnetic particle suspensions for wet MPI applications
• Suitable for visible and fluorescent magnetic particle inspection
• Excellent particle mobility and surface coverage
• Designed for reliable surface and near surface defect detection
• Suitable for industrial and automated inspection processes
• Effective for large component and high volume inspections
• Cleaner application and reduced oil content compared with oil carrier systems
• Compatible with ultraviolet inspection workflows for fluorescent testing
• Supports repeatable and consistent inspection performance
• Suitable for manufacturing, aerospace, and engineering applications

Fluorescent water based MPI systems are commonly used where higher inspection sensitivity is required, particularly during critical component inspections. Under ultraviolet light conditions, fluorescent particles improve defect visibility and help inspectors identify fine discontinuities more effectively.

SREM water based MPI products are designed to provide stable particle suspension characteristics and dependable inspection performance across demanding industrial environments. The range supports a variety of inspection methods and operational requirements within non destructive testing processes.

Mason Technology works with trusted international suppliers including SREM to provide reliable water based MPI products throughout Ireland. Our team can assist with selecting suitable magnetic particle inspection consumables based on your testing process, inspection sensitivity requirements, and industrial application needs.

NEED EXPERT ADVICE?

Oil Based MPI Products

Oil based MPI products are designed for high sensitivity magnetic particle inspection applications where reliable defect visibility and consistent particle performance are essential. Mason Technology supplies oil based magnetic particle inspection consumables from trusted manufacturers including SREM, supporting industrial and aerospace non destructive testing applications throughout Ireland.

Oil based magnetic particle inspection systems are widely used during wet method MPI processes where fine surface and near surface discontinuities must be identified accurately. These systems use magnetic particles suspended within specially formulated oil carriers to improve particle mobility, suspension stability, and surface wetting performance during inspection.

The oil carrier helps magnetic particles move efficiently across the test surface while the component is magnetised. As particles gather around discontinuities, inspectors can identify cracks, laps, seams, and other defects that may affect component quality or structural integrity.

Oil based MPI products are commonly selected for:

• High sensitivity inspections
• Aerospace inspection processes
• Precision engineering applications
• Critical component testing
• Manufacturing quality control
• Industrial maintenance operations

Compared with water based systems, oil based magnetic particle inspection products can provide enhanced particle suspension stability and improved defect indication visibility during demanding inspection applications. These characteristics make oil carrier systems particularly suitable for inspections where maximum sensitivity and reliable repeatability are important.

Mason Technology supplies oil based magnetic particle inspection consumables suitable for visible and fluorescent MPI processes.

Oil Based MPI Products Key Features

• Oil based magnetic particle suspensions for wet MPI applications
• Suitable for high sensitivity fluorescent magnetic particle inspection
• Excellent particle suspension stability and surface wetting characteristics
• Designed for reliable surface and near surface defect detection
• Suitable for aerospace and precision engineering inspections
• Supports consistent particle mobility during inspection processes
• Compatible with ultraviolet fluorescent inspection workflows
• Effective for critical component and fine crack detection
• Suitable for industrial and laboratory non destructive testing applications
• Reliable inspection performance across demanding operational environments

Fluorescent oil based MPI systems are commonly used in applications requiring increased inspection sensitivity and enhanced defect visibility under ultraviolet light conditions. These products help inspectors identify fine fatigue cracks and surface discontinuities that may not be easily visible using lower sensitivity inspection methods.

SREM oil based MPI products are designed to support dependable inspection performance across critical industrial testing environments. The range includes magnetic particle suspensions and supporting consumables suitable for a broad range of wet method magnetic particle inspection procedures.

Mason Technology works closely with trusted suppliers including SREM to provide reliable oil based MPI products throughout Ireland. Our team can assist with selecting the most suitable magnetic particle inspection consumables based on your inspection workflow, testing standards, and operational requirements.

NEED EXPERT ADVICE?